Canon PowerShot G12 - Manual (Page 99)

Focus Bracketing (Focus-BKT Mode)
99
Focusing roughly.
● The side bar shows the MF indicator focal
point and a distance display. While looking
at the magnified area, turn the
Ê dial to
find an approximate focus.
Fine tuning the focus.
● If you press the shutter button halfway or
press the
button, you can fine tune the
focus (Safety MF).
The camera automatically takes three continuous shots in the following order:
one at the position set in manual focus, and one each with focus positions
preset farther and nearer. The focus adjustment can be set in 3 levels.
Choose .
● After pressing the m button, press the
op buttons to choose , then press the
qr buttons or turn the Ê dial to choose
.
MF indicator
• You cannot change the AF frame mode or size while focusing manually
(p. 92). If you want to change the AF frame mode or size, cancel Manual
focus mode first.
• In order to focus accurately, try attaching the camera to a tripod.
• When using the Digital Zoom (p. 58), Digital Tele-converter (p. 59), or
when using a television as a display (p. 90), you will be able to focus but
the magnified area will not display.
• If you press the n button to display the 4 tab and set [MF-Point
Zoom] to [Off], the magnified display will not be available.
• If you press the n button to display the 4 tab and set [Safety MF]
to [Off], you will not be able to fine tune the focus even if you press the
shutter button halfway.
Focus Bracketing (Focus-BKT Mode)
COP
Y