Canon PowerShot G12 - Manual (Page 114)

Changing the Color and Shooting
114
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
● Pressing the l button restores the
shooting screen.
Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose Y.
● Follow Steps 1 – 2 on p. 62 to choose Y.
Press the
l button.
X The unchanged image and the Color Swap
image will alternately display.
● The default setting is to change green to
gray.
Specify the color to be swapped.
● Position the center frame so it is filled with
the color you want and press the
q button.
X The specified color will be recorded.
Using the flash may cause unexpected results in this mode.
COP
Y