Humboldt HM-1327 Humboldt Marshall/TSR Loader - Manual (Page 17)

14
Press you will see this screen:
Press (DATE/UNIT/STANDARD). You should see this screen:
Press (STANDARD) to toggle between ASTM and BRITISH STANDARD.
Select the standard desired—the flashing standard is the active choice.
To return to any prior screen you can always press
* DATE/UNIT/STANDARD
* MANUFACTURERS INFO.
* CHANGE DATE
* CHANGE TIME
* UNIT = ENGLISH/METRIC
* STANDARD = ASTM/BS
Input Configuration
If you are adding new instrumentation, changing existing instrumentation
or reconfiguring the HM-1327’s input setup, you need to configure the
input for use with the devices you have.
To configure a input, press
You should see this screen:
Press you will see this screen:
Press (ENGINEERING SETUP). You should see this screen:
* REVIEW LAST TEST
* RUN TEST
* MORE SETUP
* ENGINEERING SETUP
* SENSOR LIMITS OFF
* RAW_DATA
* MORE SETUP
* CONFIGURATION
* CALIBRATION