Humboldt HM-1327 Humboldt Marshall/TSR Loader - Manual (Page 25)

22
You should see this screen:
Peak values are shown on the first two lines. To review all the data,
press
(REVIEW DATA). You should see this screen:
Pressing
(PRINT DATA) will print the data to a printer or save a file
in ASCII mode to your computer using Humboldt Material testing Software
(HMTS) or Windows Hyper terminal. Once the data has been printed
or transferred, you can begin another test after you have loaded another
sample and raised the head to the start position, close to the load cell. by
pressing
(RUN MARSHALL TEST).
If you don’t have a printer or a computer connected to the HM-1327, you
can press
(SCROLL DATA) to scroll the data. You should see this
screen:
Using the (NEXT) key to scroll through the readings and the
(LAST) key to view the last reading taken.
To return to any prior screen you can always press
TSR
See User-Defined Unconfined Compression, without the displacement
transducer selected in the test configuration
STAB PEAK “#”
FLOW PEAK “#”
REVIEW DATA
* RUN MARSHALL TEST
* PRINT DATA
* SCROLL DATA
* RUN MARSHALL TEST
STAB “READING”
FLOW
“READING”
* NEXT
* LAST
Time = 0.0 sec