Humboldt HM-1327 Humboldt Marshall/TSR Loader - Manual (Page 20)

Calibration
This menu item is used to calibrate or verify the calibration of the HM-1327.
WARNING: Calibration should only be performed by trained
personnel with proper, certified equipment. The HM-1327 and
its instrumentation should be calibrated once a year or as the
need arises.
Input Calibration
To calibrate a input, press
You should see this screen:
Press you will see this screen:
Press
(ENGINEERING SETUP). You should see this screen:
Press (CALIBRATION) You will be asked for a password, enter:
You should see this screen:
* REVIEW LAST TEST
* RUN TEST
* MORE SETUP
* ENGINEERING SETUP
* SENSOR LIMITS OFF
* RAW_DATA
* MORE SETUP
* CONFIGURATION
* CALIBRATION
17
CALIBRATION screen
* SELECT INPUT 1
* CALIBRATION INPUT
* CLEAR CALIBRATION