Bluetooth® settings -98 – NISSAN 2015 Frontier - Owner's Manual User Manual

Page 283

Advertising
background image

NOTE:

Text messages are only displayed if the
vehicle speed is less than 5 mph (8 km/h).

BLUETOOTH® SETTINGS

To access and adjust the settings for the
Bluetooth® Hands-Free Phone System:

1. Press the SETTING button.

2. Use the TUNE/FOLDER knob to select

“Bluetooth” and then press the ENTER but-
ton:

● Bluetooth

Select “On” or “Off” to turn the vehicle’s
Bluetooth® system on or off.

● Add Phone or Device

To connect a phone to the system, refer to
“Connecting procedure” in this section.

● Delete Phone or Device

Select to delete a phone from the displayed
list. The system will ask to confirm before
deleting the phone.

● Replace Phone

Select to replace a phone from the displayed
list. When a selection is made, the system
will ask to confirm before proceeding. The
recorded phonebook for the phone being
deleted will be saved as long as the new
phone’s phonebook is the same as the old
phone’s phonebook.

● Select Phone

Select to connect to a previously connected
phone from the displayed list.

● Show Incoming Calls

Select “Driver Only” to have incoming call
information displayed only in the vehicle in-
formation display. Select “Both” to have in-
coming call information displayed in both the
vehicle information display and the center
display screen.

● Phonebook Download

Select to turn on or off the automatic down-
load of a connected phone’s phonebook.

● Text Message

Select to turn on or off the vehicle’s text
messaging feature.

● New Text Sound

Select to adjust the volume of the sound that
plays when a new text is received by a phone
connected to the Bluetooth® Hands-Free
Phone System. The setting all the way to the
left indicates that the new text sound will be
muted.

● Show Incoming Text

Select “Driver Only” to have incoming text
messages displayed only in the vehicle infor-
mation display. Select “Both” to have incom-
ing text messages displayed in both the ve-
hicle information display and the center
display screen. Select “None” to have no
display of incoming text messages.

● Edit Custom Messages

Select to set a custom message that will be
available with the standard options when
sending a text message. To set a custom
message, send a text message to your own
phone number while the phone is connected
to the system. Three custom messages can
be set. Custom messages can only be set
while the vehicle is stationary.

4-98

Monitor, climate, audio, phone and voice recognition systems

Advertising