NISSAN 2015 Frontier - Owner's Manual User Manual

Page 324

Advertising
background image

4WD Shift

Switch Position

Wheels Driven

Indicator Light

Use Conditions

4WD Shift Procedure

4WD shift

Transfer 4LO position

2WD

Rear wheels

For driving on dry, paved
roads (Economy drive)

Move the 4WD switch.
2WD <—> 4H
4WD shift indicator light will indicate transfer shift position en-
gaged.

4H

4 wheels

For driving on rocky,
sandy or snow-covered
roads

Neutral

*1
May blink

Neutral disengages the
automatic transmission
mechanical parking lock,
which will allow the ve-
hicle to roll. Do not leave
the transfer shift position
in Neutral.*2

1. Stop the vehicle.
2. For automatic transmission vehicles: Shift the shift lever to

the (N) position with the brake pedal depressed.
For manual transmission vehicles: Shift the shift lever to the
(N) position with the clutch depressed.

3. For automatic transmission vehicles: Depress and turn the

4WD shift switch to 4LO or 4H with the brake pedal de-
pressed.
For manual transmission vehicles: Depress and turn the
4WD switch to 4LO or 4H with the clutch pedal de-
pressed.

THE TRANSFER CASE DOES NOT ENGAGE BETWEEN 4H
AND 4LO (OR 4LO TO 4H) UNLESS YOU HAVE FIRST
STOPPED THE VEHICLE, DEPRESSED THE BRAKE PEDAL
AND MOVED THE SHIFT LEVER TO NEUTRAL FOR AUTO-
MATIC TRANSMISSION VEHICLES. FOR MANUAL TRANS-
MISSION VEHICLES YOU MUST MOVE THE SHIFT LEVER
TO NEUTRAL. *3

4LO

4 wheels

Illuminated

For use when maximum
power and traction is
required (for example: on
steep grades or rocky,
sandy, muddy roads)

*1: Before moving the shift lever from neutral, wait until the 4LO indicator light stays on steady. This indicates that the 4WD shift procedure is completed and

the transfer gear is correctly set in the 4LO position. If the vehicle is shifted into gear before the indicator is on steady, the transfer gear may grind, not
engage correctly or stay in the neutral position.

- If the 4WD warning light illuminates, perform the following procedure to return the transfer case to correct operating condition.

1. Turn off the engine by turning the ignition switch

ЉOFFЉ.

Starting and driving

5-27

Advertising