Windshield wiper blades -23, Cleaning -23 – NISSAN 2015 Frontier - Owner's Manual User Manual

Page 388

Advertising
background image

2. Gently lift up on the tab

1

.

3. Pull the filter cover toward you and then

down

2

.

4. Remove the old filter

3

.

NOTE:

The filter is marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.

5. Insert the new filter into the housing and

slide it over to the right.

6. Replace the filter cover. The cover will click

into place under the tab.

7. Install the glove box door.

CLEANING

If your windshield is not clear after using the
windshield-washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.

Clean the outside of the windshield with a washer
solution or a mild detergent. Your windshield is
clean if beads do not form when rinsing with clear
water.

Clean each blade by wiping it with a cloth soaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your wind-
shield is still not clear after cleaning the blades
and using the wiper, replace the blades.

CAUTION

Worn windshield wiper blades can dam-
age the windshield and impair driver
vision.

LDI2047

WINDSHIELD WIPER BLADES

Maintenance and do-it-yourself

8-23

Advertising