Transfer case shifting procedures -26 – NISSAN 2015 Frontier - Owner's Manual User Manual

Page 323

Advertising
background image

CAUTION

Do not drive the vehicle in the 4H or 4LO

position on dry hard surface roads. Driv-
ing on dry, hard surfaces in 4H or 4LO
may cause unnecessary noise, tire wear
and increased fuel consumption.

If the 4WD warning light turns on when
you are driving on dry hard surface
roads:

– in the 4H position, shift the 4WD shift

switch to 2WD.

– in the 4LO position for automatic

transmission vehicles, stop the ve-
hicle and shift the shift lever to the N
position with the brake pedal de-
pressed and shift the 4WD shift
switch to 2WD.

– in the 4LO position for manual trans-

mission vehicles, stop the vehicle
and shift the shift lever to the N po-
sition with the clutch pedal de-
pressed and shift the 4WD shift
switch to 2WD.

If the warning light is still on after the

above operation, have your vehicle
checked by a NISSAN dealer as soon as
possible.

TRANSFER CASE SHIFTING
PROCEDURES

The part time 4WD system provides 3 positions
(2WD, 4H and 4LO), so you can select the
desired drive mode according to the driving con-
ditions.

2WD or 4WD shift procedure:

5-26

Starting and driving

Advertising