NISSAN 2015 Frontier - Owner's Manual User Manual
Page 86
![background image](/manuals/602674/86/background.png)
7. If the booster seat is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light
may or may not illuminate,
depending on the size of the child and the
type of booster seat being used. For addi-
tional information, refer to “Front passenger
air bag and status light” in this section.
Booster seat installation — jump seats
(King Cab models only)
WARNING
● If a child restraint system is not in-
stalled properly, the child could be seri-
ously injured or killed in a sudden stop
or collision.
– For boosters, DO NOT install if the
child restraint system base extends
past the forward edge of the seat
cushion.
– Do not install a child restraint system
on the passenger’s side jump seat
without unfolding the seat extender.
CAUTION
Do not use the lap/shoulder belt in the
Automatic Locking Retractor (ALR) mode
when using a booster seat with the seat
belts.
Refer to all Warnings and Cautions in the “Child
Safety”, “Child Restraint” and “Booster Seats”
sections before installing a child restraint.
Follow these steps to install a booster seat in the
jump seats:
1. To access the jump seat extension (passen-
ger’s side only)
᭺
1
on the jump seat, pull up
᭺
2
on the extension to unfold it to the open
position. Then unfold the two support legs
᭺
3
and lower the jump seat to the full open
seating position.
WRS0475
LRS0559
Safety—Seats, seat belts and supplemental restraint system
1-65