NISSAN 2015 Frontier - Owner's Manual - Manual (Page 347)

Getting the spare tire and tools (Crew
Cab models)
The tools and tool bag are located behind the
rear bench seat.
1. Remove the head restraints/headrests and
fold the rear bench seat down. For additional
information, refer to “Folding the rear bench
seat down ” in the “Safety–Seats, seat belts
and supplemental restraint system” section.
2. Remove the tool bag and locate the wheel-
nut wrench.
3. Collapse the jack to remove it from the stor-
age location by inserting the wheel-nut
wrench into the jack screw as shown and
turning the wheel-nut wrench towards you
until the jack becomes loose. Then loosen
the jack screw with your fingers until it is
free.
4. Remove the jack from behind the seat.
5. To reinstall the jack and tools, reverse
steps 1 to 4.
LCE2164 LCE2159 LCE2165
6-6 In case of emergency