NISSAN 2012 GT R - Owner's Manual - Manual (Page 145)

Black plate (144,1)
R35-D EDITED: 2011/ 2/ 4
2-50 Instruments and controls
If the ignition switch is pushed to the OFF
position and one of the doors is opened, the
headlights remain on for 45 seconds.
Refer to the separate Multi Function Display
Owner’s Manual.
Headlight beam select
When the headlights are on, push the lever to
the front of the vehicle
*
1 to switch to the high
beams. The high-beam indicator light illumi-
nates. (
“High beam indicator light” page 2-
30)
Pull the lever to the neutral position
*
2 to
switch to the low beams.
Pulling the lever toward you
*
3 will flash the
headlight high beam even when the headlight
switch is in the OFF position.
CAUTION
Use low beams when there are cars
approaching from the opposite direc-
tion, during city driving and at similar
times.
Battery saver system
A chime will sound when the driver side door is
opened with the light switch in the
or
position and the ignition switch in the ACC,
OFF or LOCK position. ( “Light reminder
chime” page 2-31)
When the headlight switch is in the
or
position while the ignition switch is in the ON
position, the lights will automatically turn off 45
seconds after the ignition switch has been
pushed to the OFF position.
When the headlight switch remains in the
or
position after the lights automatically turn
off, the lights will turn on when the ignition
switch is pushed to the ON position.