NISSAN 2012 GT R - Owner's Manual User Manual

Page 242

Advertising
background image

Black plate (245,1)

R35-D EDITED: 2011/ 2/ 4

VDC warning light

will not flash. The VDC

system is automatically reset to on when the
ignition switch is placed in the off position then
back to the on position.
(

“Vehicle Dynamic Control (VDC) warning

light” page 2-30,

“Vehicle Dynamic Con-

trol (VDC) off indicator light” page 2-31)
The computer has a built-in diagnostic feature
that tests the system each time you start the
engine and move the vehicle forward or in
reverse at a slow speed. When the self-test
occurs, you may hear a “clunk” noise and/or feel
a pulsation in the brake pedal. This is normal and
is not an indication of a malfunction.

WARNING

. The VDC system is designed to help

the driver maintain stability but
does not prevent accidents due to
abrupt steering operation at high
speeds or by careless or dangerous
driving techniques. Reduce vehicle
speed and be especially careful
when driving and cornering on slip-
pery surfaces and always drive care-
fully.

. Do not modify the vehicle’s suspen-

sion. If suspension parts such as

shock absorbers, struts, springs,
stabilizer bars, bushings and
wheels are not NISSAN approved
or are extremely deteriorated, the
VDC system may not operate prop-
erly. This could adversely affect
vehicle handling performance, and
the VDC warning light

may

illuminate.

. If brake related parts such as brake

pads, rotors and calipers are not
standard equipment or are extre-
mely deteriorated, the VDC system
may not operate properly and the
VDC warning light

may illumi-

nate.

. If engine control related parts are

not standard equipment or are ex-
tremely deteriorated, the VDC warn-
ing light

may illuminate.

. When driving on extremely inclined

surfaces such as higher banked
corners, the VDC system may not
operate properly and the VDC warn-
ing light

may illuminate. Do not

drive on these types of roads.

. When driving on an unstable sur-

face such as a turntable, ferry,

elevator or ramp, the VDC warning
light

may illuminate. This is not

a malfunction. Restart the engine
after driving onto a stable surface.

. If wheels or tires other than the

those recommended are used, the
VDC system may not operate prop-
erly and the VDC warning light
may illuminate.

. The VDC system is not a substitute

for winter tires or tire chains on a
snow covered road.

NOTE:
. Always make sure the VDC is ON

before driving the vehicle by checking
that the VDC OFF indicator lights on
the meter and the VDC set-up switch
are not illuminated.

The GT-R is a high performance vehicle
and the VDC must be on/activated to
provide proper powertrain operation
and intended drivability.

Starting and driving

5-49

Advertising