NISSAN 2012 GT R - Owner's Manual User Manual

Page 28

Advertising
background image

Black plate (27,1)

R35-D EDITED: 2011/ 2/ 4

ITEMS

Brake Fluid

GT-R SPECIFIED FLUIDS

Genuine NISSAN Brake Fluid R35 Special II*4

MAINTENANCE INTERVAL

Change brake fluid every 3,000 miles (5,000 km).

*1: Mobil 1 (0W-40) (100% synthetic) is the factory fill oil. The VR38 engine with its plasma-sprayed bores was

developed using this oil. NISSAN cannot ensure proper engine operation and durability if other 0W-40
synthetic oil is used. If Mobil 1 (0W-40) is not available, Mobil 1 (10W-40) (100% synthetic) may be used;
however, some performance loss may be noticed.

*2: The differential oil temperature cannot be displayed on the multi function display. The differential oil

temperature can be checked with the transmission oil temperature since both usually increases or decrease
concurrently.

*3: MOTUL NISMO COMPETITION OIL type 2189E 75W 140 can also be used. MOTUL NISMO

COMPETITION OIL type 2189E 75W 140 may not be available at most NISSAN dealer or in all markets.

*4: Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC)

unit and other related parts were specially designed for this brake fluid and NISSAN cannot ensure the best
performance and proper operation of the vehicle if other brake fluid is used.

. When the transmission oil temperature

increases to over 284

8F (1408C) the color

of the meter display turns to red. However,
the vehicle can be driven until the tempera-
ture reaches 295

8F (1468C). When the

color of the meter display turns red, because
the oil is deteriorated, replace the transmis-
sion and differential oil after driving.

. When the engine coolant temperature in-

creases above 230

8F (1108C), the color of

the meter display turns to red to warn and
output is controlled at a low level. When the
engine oil temperature is higher than 275

8F

(135

8C), the meter is displayed in red, the

engine output is controlled at 4000 rpm, and
the

&

M

position will automatically change to

the

&

A

position.

Inspection and adjustments of tires,
suspension and brakes

. Check the steering and suspension system

and other links for loose and/or damaged
parts.

. Measure and adjust the wheel alignment.
. Check tire wear and cracking.
. Check the tire pressure and adjust the

pressure as necessary when the tires are
cold. (

“Recommended adjustments for

GT-R Overview

GTR-21

Advertising