Opening the fuel filler door -24 – NISSAN 2012 GT R - Owner's Manual User Manual

Page 185

Advertising
background image

Black plate (186,1)

R35-D EDITED: 2011/ 2/ 4

3-24

Pre-driving checks and adjustments

. Never pour fuel into the throttle

body to attempt to start your vehi-
cle.

. Do not fill a portable fuel container

in the vehicle or trailer. Static elec-
tricity can cause an explosion of
flammable liquid, vapor or gas in
any vehicle or trailer. To reduce the
risk of serious injury or death when
filling portable fuel containers:

— Always place the container on

the ground when filling.

— Do not use electronic devices

when filling.

— Keep the pump nozzle in contact

with the container while you are
filling it.

— Use only approved portable fuel

containers for flammable liquid.

NOTICE

. If fuel is spilled on the vehicle body,

flush it away with water to avoid
paint damage.

. Insert the cap straight into the fuel-

filler tube, then tighten until the
fuel-filler cap clicks. Failure to tight-
en the fuel-filler cap properly may
cause the

Malfunction Indicator

Light (MIL) to illuminate. If the
light illuminates because the fuel-
filler cap is loose or missing, tighten
or install the cap and continue to
drive the vehicle. The

light

should turn off after a few driving
trips. If the

light does not turn

off after a few driving trips, have the
vehicle inspected by a GT-R certified
NISSAN dealer.

(

“Malfunction Indicator Light

(MIL)” page 2-30)

. This vehicle includes a system that

can supply fuel even during high-G
(gravity) turns. The fuel tank pres-
sure is higher when the vehicle is
hot. If the vehicle is refueled when
the vehicle is hot, the fuel pump may
automatically shut off before the
tank is full. This does not indicate
that there is a malfunction.

OPENING THE FUEL FILLER DOOR

1. Unlock the fuel-filler door by using one of the

following operations.

.

Push the door handle request switch

with the Intelligent Key carried with you.

.

Push the UNLOCK button on the In-

telligent Key.

.

Push the power door lock switch to the

UNLOCK position.

Advertising