NISSAN 2012 Murano - Owner's Manual User Manual

Page 119

Advertising
background image

SIC1699A

How to arm the vehicle security system

1. Close all windows.

The system can be armed even if the
windows are open.

2. Push the ignition switch to the OFF position.

3. Carry the Intelligent Key.

4. Close all doors and lift gate/trunk. Lock all

door. The doors can be locked with:

.

the lock button

on the Intelligent Key

.

any request switch

.

the power door lock switch

.

the key — master or mechanical

5. Confirm that the security indicator light

*

A

comes on. The security indicator light stays
on for about 30 seconds. The vehicle
security system is now pre-armed. After
about 30 seconds the vehicle security
system automatically shifts into the armed
phase. The security light begins to flash
once every approximately 3 seconds. If,
during this 30-second pre-arm time period,
the door is unlocked, or the ignition switch is
pushed to ACC or ON, the system will not
arm.

Even when the driver and/or passengers
are in the vehicle, the system will activate
with all doors and lift gate/trunk locked
with the ignition switch in the LOCK
position. When pushing the ignition switch
to the ACC or ON position, the system will
be released.

Vehicle security system activation

The vehicle security system will give the follow-
ing alarm:
. The headlights blink and the horn sounds

intermittently.

. The alarm automatically turns off after

approximately 1 minute. However, the alarm
reactivates if the vehicle is tampered with
again.

The alarm is activated by:
. Unlocking the door or opening the lift gate/

trunk without using the button on the
Intelligent Key, the request switch or the
key. (Even if the door is opened by releasing
the door inside lock knob, the alarm will
activate.)

How to stop an activated alarm

The alarm will stop by unlocking a door by
pushing the unlock button

on the Intelligent

Key, pushing the request switch or using the key.
The alarm will not stop if the ignition switch is
placed in the ACC or ON position.

If the system does not operate as de-
scribed above, have it checked by a
NISSAN dealer.

Instruments and controls

2-29

Advertising
This manual is related to the following products: