NISSAN 2012 Murano - Owner's Manual - Manual (Page 33)

SSS0569
REAR SEATS (Hardtop models)
Folding
Before folding the rear seats:
. Secure the seat belts on the seat belt hooks
on the side wall. (See “Seat belt hooks
(Hardtop models)” later in this section.)
. Disconnect and stow the center seat belt
and tongue into the retractor base. (See
“Rear center seat belt (Hardtop models)”
later in this section.)
. Always reconnect the center seat belt when
the seat is returned to the upright position.
. Remove drink containers from the rear cup
holder.
To fold down the seatbacks:
Pull the strap on the rear seat
*
A . Pull the lever
*
B beside the cargo area and fold the seat-
back.
SSS0821
To return the seatbacks:
Manual operation:
Lift up each seatback and push it to the upright
position until it is latched.
Power operation (if so equipped):
Push and hold the corresponding switch located
on the lower side of the instrument panel
*
B or
the right or left side in the cargo area
*
A .
A beep sounds once and the seatback will be
returned automatically.
A beep sounds twice when the seatback is fully
returned to the seating position.
If the control unit detects any obstacle or
malfunctions while in the power operation, a
Safety — Seats, seat belts and supplemental restraint system 1-9