Warning – NISSAN 2012 Murano - Owner's Manual User Manual
Page 68
1-44
Safety — Seats, seat belts and supplemental restraint system
SSS0822
INSTALLING TOP TETHER STRAP
(Hardtop models)
First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions
only) or the seat belt, as applicable.
1. If necessary, raise or remove the headrest to
position the top tether strap over the top of
the seatback. If the headrest is removed,
store it in a secure place. Be sure to reinstall
the headrest when the child restraint is
removed.
See “Adjustable headrest (Hardtop mod-
els)” earlier in this section for headrest
adjustment, removal and installation informa-
tion.
Position the top tether strap over the top of
the seatback.
2. Secure the top tether strap to the tether
anchor point on the back of the seatback
behind the child restraint.
3. Refer to the appropriate child restraint
installation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
BOOSTER SEATS
Precautions on booster seats
WARNING
If a booster seat and seat belt are not
used properly, the risk of a child being
injured in a sudden stop or collision
greatly increases:
. Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
. Make sure the shoulder belt is not
behind the child or under the child’s
arm.
. A booster seat must only be in-
stalled in a seating position that has
a lap/shoulder belt.