NISSAN 2015 Quest - Owner's Manual - Manual (Page 278)

will turn on. If another audio source is playing
and the iPod
Š is connected, push the DISC·AUX
button repeatedly until the center display
changes to the iPod
Š mode.
Interface:
The interface for iPod Š operation shown on the
vehicle center display is similar to the iPod
Š
interface. Use the multi-function controller and
the ENTER or BACK button to play the iPod
Š
with your favorite settings.
The following items can be chosen from the
menu list screen. For further information about
each item, see the iPod
Š
Owner’s Manual.
. Now Playing
. Playlists
. Artists
. Albums
. Songs
. Podcasts
. Genres
. Composers
. Audiobooks
. Shuffle Songs
. Play mode
The following touch-panel buttons shown on the
screen are also available:
.
: returns to the previous screen.
. : plays/pauses the music selected.
Next/Previous Track and Fast
Forward/Rewind:
When the or button is pushed for more
than 1.5 seconds while the iPod Š is playing, the
iPod Š will play while fast forwarding or rewind-
ing. When the button is released, the iPod
Š
will
return to the normal play speed.
When the or button is pushed for less
than 1.5 seconds while the iPod
Š
is playing, the
next track or the beginning of the current track
on the iPod
Š will be played.
The multi-function controller can also be used to
select tracks when the iPod
Š is playing.
REPEAT (RPT), RANDOM (RDM):
When the RPT button is pushed while a track is
being played, the play pattern can be changed
as follows:
Bluetooth Š STREAMING AUDIO (mod-
els with navigation system)
Your NISSAN is equipped with Bluetooth Š
Streaming Audio. If you have a compatible
Bluetooth
Š device with streaming audio (A2DP
profile), you can set up the wireless connection
between your Bluetooth
Š
device and the in-
vehicle audio system. This connection allows
you to listen to the audio from the Bluetooth
Š
device using your vehicle speakers. It also may
allow basic control of the device for playing and
skipping audio files using the AVRCP Blue-
tooth
Š profile. All Bluetooth Š Devices do not
have the same level of controls for AVRCP.
Please consult the manual for your Bluetooth
Š
Device for more details.
Once your Bluetooth Š device is connected to
the in-vehicle audio system, it will automatically
reconnect whenever the device is present in the
vehicle and you select Bluetooth
Š
Audio from
your audio system. You do not need to manually
reconnect for each usage.
Wireless LAN (Wi-Fi) and the Bluetooth Š
functions share the same frequency band (2.4
GHz). Using the Bluetooth
Š and the wireless
LAN functions at the same time may slow down
or disconnect the communication and cause
undesired noise. It is recommended that you
turn off the wireless LAN (Wi-Fi) when using the
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-95