NISSAN 2015 Quest - Owner's Manual - Manual (Page 351)

4-168 Monitor, heater, air conditioner, audio, phone and voice recognition systems
SAA2551
6. Select a category to be learned by the
system from the following list.
. Phone Commands
. Navigation Commands
. Information Commands
. Audio Commands
. Help Commands
The voice commands in the category are
displayed.
7. Select a voice command and then push the
ENTER button.
The voice recognition system starts.
SAA2552
8. The system requests that you repeat a
command after a tone.
9. After the tone sounds and the icon on the
screen changes from to , speak the
command that the system requested.
10. When the system has recognized the voice
command, the voice of the user is learned.
Push the switch or BACK button to return
to the previous screen.
If the system has learned the command cor-
rectly, the voice command status on the right
side of the command turns from “None” to
“Stored”.
SAA2553
Speaker Adaptation function settings:
Edit User Name
Edit the user name using the keypad displayed
on the screen.
Delete Voice Data
Resets the user’s voice that the voice recogni-
tion system has learned.
Continuous Learning
When this item is turned on, you can have the
system learn the voice commands in succes-
sion, without selecting commands one by one.