NISSAN 2015 Quest - Owner's Manual - Manual (Page 41)

1-22 Safety — Seats, seat belts and supplemental restraint system
SSS1165
Attaching 3rd row center seat belt:
Always be sure the 3rd row center seat belt
connector tongue and connector buckle are
attached. Disconnect only when folding down
the 3rd row seat.
To connect the buckle:
1. Pull out the connector tongue from the
retractor base
*
1 .
2. Pull out the seat belt tongue from the
retractor base
*
2 .
3. Pull the seat belt and secure the connector
buckle until it clicks
*
3 .
The center seat belt connector tongue and
buckle are indicated by the
! and ~ mark.
The center seat belt connector tongue can be
attached only into the 3rd row center seat belt
connector buckle.
To fasten the seat belt, see “Fastening the seat
belts” (P.1-19).
WARNING
. When attaching the 3rd row center
seat belt connector, be certain that
the seatbacks are completely se-
cured in the latched position and
the 3rd row center seat belt con-
nector is completely secured.
. If the 3rd row center seat belt
connector and the seatbacks are
not secured in the correct position,
serious personal injury may result in
an accident or sudden stop.