Bsw driving situations -20 – NISSAN 2015 Quest - Owner's Manual User Manual

Page 373

Advertising
background image

5-20

Starting and driving

driving in a narrow lane, the radar
sensors may detect vehicles driving
two lanes away.

. The radar sensors are designed to

ignore most stationary objects,
however objects such as guardrails,
walls, foliage and parked vehicles
may occasionally be detected. This
is a normal operating condition.

. Severe weather or road spray con-

ditions may reduce the ability of the
radar to detect other vehicles.

. Do not use the BSW system when

towing a trailer because the system
may not function properly.

. Excessive noise (for example, audio

system volume, open vehicle win-
dow) will interfere with the chime
sound, and it may not be heard.

SSD1026

Illustration 1 - Approaching from behind

BSW DRIVING SITUATIONS

Another vehicle approaching from be-
hind

Illustration 1: The BSW indicator light illumi-
nates if a vehicle enters the detection zone from
behind in an adjacent lane.

However, if the overtaking vehicle is traveling
much faster than your vehicle, the indicator light
may not illuminate before the detected vehicle is
beside your vehicle. Always use the side and
rear mirrors and turn and look in the direction
your vehicle will move to ensure it is safe to
change lanes.

SSD1031

Illustration 2 - Approaching from behind

Illustration 2: If the driver activates the turn
signal, then the system chimes (twice) and the
BSW indicator light flashed.

NOTE:

If the driver activates the turn signal before
a vehicle enters the detection zone, the
BSW indicator light will flash but no chime
will sound when the other vehicle is
detected.

Advertising