Automatic air conditioner -17 – NISSAN 2011 Rogue - Owner's Manual User Manual

Page 175

Advertising
background image

Black plate (175,1)

Model "S35-D" EDITED: 2010/ 6/ 4

SAA1792

AUTOMATIC AIR CONDITIONER

1.

Air flow control dial

2.

Temperature control dial

3.

Fan speed control dial

4.

Rear window defroster button (See “REAR
WINDOW AND OUTSIDE MIRROR DEFROS-
TER SWITCH” in the “2. Instruments and con-
trols” section.)

5.

Outside air circulation

/Air recirculation

button

6.

A/C (Air Conditioner) button

Automatic operation (AUTO)

The AUTO mode may be used all year around as
the system automatically controls constant
temperature, air flow distribution and fan speed.

To turn off the heater and air conditioner, turn the
fan speed control dial to the OFF position.

Cooling and dehumidified heating:

1. Turn the air flow control dial and fan speed

control dial to the AUTO position.

2. If the A/C indicator light does not illuminate,

push the A/C button. (The A/C indicator
light will illuminate.)

3. Turn the temperature control dial to set the

desired temperature.

4. Push and hold the outside air circulation

/air recirculation

button for more

than 1.5 seconds to set the automatic

control between the outside air circulation
and air recirculation modes.

When setting the automatic control mode,
the indicator lights

and

will blink

twice indicating that the system is in the
automatic control mode.

A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.

Heating (A/C off):

1. Turn the air flow control dial and fan speed

control dial to the AUTO position.

2. If the A/C indicator light illuminates, push the

A/C button. (The A/C indicator light will turn
off.)

3. Turn the temperature control dial to set the

desired temperature.

4. Push and hold the outside air circulation

/air recirculation

button for more

than 1.5 seconds to set the automatic
control between the outside air circulation
and air recirculation modes.

When setting the automatic control mode,
the indicator lights will blink twice indicating
that the system is in the automatic control
mode.

Center display, heater, air conditioner, audio, phone and voice recognition systems

4-17

Advertising
This manual is related to the following products: