NISSAN 2011 Rogue - Owner's Manual - Manual (Page 176)

Black plate (176,1)
Model "S35-D" EDITED: 2010/ 6/ 4
. Do not set the temperature lower than
the outside air temperature. Doing so
may cause the temperature to not be
controlled properly.
. If the windows fog up, use dehumidified
heating instead of the A/C off heating.
Dehumidified defrosting/defogging:
1. Turn the fan speed control dial to the desired
position.
2. Turn the air flow control dial to the
position.
3. Turn the temperature control dial to set the
desired temperature.
. To remove frost from the outside surface
of the windshield quickly, set the tem-
perature control dial and fan speed
control dial to their maximum position.
. After the windshield is cleared, turn the
air flow control dial to the AUTO position
to set to the automatic mode.
. When the or position is
selected, the air conditioner will auto-
matically turn on when the outside air
temperature is above 23
8F (−58C) to
defog the windshield. The air recircula-
tion mode will automatically turn off. The
outside air circulation mode
will be
selected to improve the defogging
performance.
Manual operation
The manual mode can be used to control the
heater and air conditioner to your desired
settings.
To turn off the heater and air conditioner, turn the
fan control dial to the OFF position.
Fan speed control:
Turn the fan speed control dial clockwise to
increase the fan speed.
Turn the fan speed control dial counterclockwise
to decrease the fan speed.
Turn the fan speed control dial to the AUTO
position to change the fan speed to the
automatic mode.
Air flow control:
Turn the air flow control dial to change the air
flow mode.
: Air flows from the center and side
ventilators.
: Air flows from the center and side
ventilators and foot outlets.
: Air flows mainly from the foot outlets.
: Air flows from the defroster and foot
outlets.
Temperature control:
Turn the temperature control dial to set the
desired temperature.
Air recirculation:
Push the outside air circulation /air recircu-
lation button to change the air circulation
mode.
When the indicator below the air recirculation
icon is illuminated, the flowing air is
recirculated inside the vehicle.
Outside air circulation:
Push the outside air circulation /air recircu-
lation button to change the air circulation
mode.
When the indicator below the outside air
circulation
icon is illuminated, the flowing
air is drawing from outside the vehicle.
Automatic air intake control:
Push and hold the outside air circulation /air
recirculation button for more than 1.5
seconds to set the automatic control between
the outside air circulation and air recirculation
modes.
When the or position is selected, the
air recirculation mode does not activate.
4-18 Center display, heater, air conditioner, audio, phone and voice recognition systems