NISSAN 2011 Rogue - Owner's Manual - Manual (Page 90)

Black plate (88,1)
Model "S35-D" EDITED: 2010/ 6/ 4
INDICATORS FOR MAINTENANCE
1. Service due indicator
This indicator appears when the customer set
distance comes for service due, for example, for
engine oil and oil filter. You can set or reset the
distance for service due. (See “TRIP COMPU-
TER” later in this section.) For scheduled
maintenance items and intervals, see your
NISSAN Service and Maintenance Guide.
2. Tire replacement indicator
This indicator appears when the customer set
distance comes for replacing tires. You can set
or reset the distance for replacing tires. (See
“TRIP COMPUTER” later in this section.)
WARNING
The tire replacement indicator is not a
substitute for regular tire checks, in-
cluding tire pressure checks. See
“CHANGING WHEELS AND TIRES” in
the “8. Maintenance and do-it-yourself”
section. Many factors including tire
inflation, alignment, driving habits and
road conditions affect tire wear and
when tires should be replaced. Setting
the tire replacement indicator for a
certain driving distance does not mean
your tires will last that long. Use the tire
replacement indicator as a guide only
and always perform regular tire checks.
Failure to perform regular tire checks,
including tire pressure checks could
result in tire failure. Serious vehicle
damage could occur and may lead to a
collision, which could result in serious
personal injury or death.
3. “OTHER” indicator
This indicator appears when the customer set
distance comes for checking or replacing
maintenance items other than the engine oil, oil
filter and tires. Other maintenance items can
include such things as air filter or tire rotation.
You can set or reset the distance for checking or
replacing the items. (See “TRIP COMPUTER”
later in this section.) For scheduled maintenance
items and intervals, see your NISSAN Service
and Maintenance Guide.
SIC4551
TRIP COMPUTER
To operate the trip computer, use the
*
A
switch.
When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the
switch
*
A briefly.
Each time the switch
*
A is pushed, the
display will change as follows:
Fuel Economy ? Average speed ? Driving
distance ? Elapsed time ? Range (distance to
empty) (dte) ? Settings
. When the switch
*
A is pushed and
held for less than 3 seconds, the selected
2-22 Instruments and controls