NISSAN 2013 Rogue - Owner's Manual - Manual (Page 177)

Black plate (175,1)
[ Edit: 2012/ 5/ 18 Model: S35-D ]
SAA1792
1. Air flow control dial
2. Temperature control dial
3. Fan speed control dial
4. Rear window defroster button (See “Rear
window and outside mirror defroster switch” in
the “2. Instruments and controls” section.)
5. Outside air circulation /Air recirculation
button
6. A/C (Air Conditioner) button
AUTOMATIC AIR CONDITIONER
Automatic operation (AUTO)
The AUTO mode may be used all year around as
the system automatically controls constant
temperature, air flow distribution and fan speed.
To turn off the heater and air conditioner, turn the
fan speed control dial to the OFF position.
Cooling and dehumidified heating:
1. Turn the air flow control dial and fan speed
control dial to the AUTO position.
2. If the A/C indicator light does not illuminate,
push the A/C button. (The A/C indicator
light will illuminate.)
3. Turn the temperature control dial to set the
desired temperature.
4. Press the outside air circulation /air
recirculation button once to change
operation of the air conditioner in the
following order.
Air recirculation mode ?Outside air circula-
tion mode?Automatic control mode?Air
recirculation mode
When automatic control mode is set, the air
recirculation indicator and outside air circu-
lation indicator will turn off.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C off):
1. Turn the air flow control dial and fan speed
control dial to the AUTO position.
2. If the A/C indicator light illuminates, push the
A/C button. (The A/C indicator light will turn
off.)
3. Turn the temperature control dial to set the
desired temperature.
4. Press the outside air circulation /air
recirculation button once to change
operation of the air conditioner in the
following order.
Center display, heater, air conditioner, audio, phone and voice recognition systems 4-27