Tire labeling -34 – NISSAN 2013 Rogue - Owner's Manual User Manual

Page 326

Advertising
background image

Black plate (324,1)

[ Edit: 2012/ 5/ 18 Model: S35-D ]

8-34

Maintenance and do-it-yourself

REAR

ORIGINAL

TIRE

P215/70-
R16 99H

230 kPa,
33 PSI

P225/60-
R17 98H

230 kPa,
33 PSI

P225/55-
R18 97V

230 kPa,
33 PSI*1
260 kPa,
38 PSI*2

SPARE

TIRE

Original tire

230 kPa,
33 PSI
260 kPa,
38 PSI*3

T155/90-
D16

420 kPa,
60 PSI

*1:

2WD models

*2:

AWD models

*3:

AWD models with 18 inch tires

SDI1575

Example

TIRE LABELING

Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental character-
istics of the tire and also provides the tire
identification number (TIN) for safety stan-
dard certification. The TIN can be used to
identify the tire in case of a recall.

SDI1606

Example

*

1

Tire size (example: P215/60R16 94H)

1. P: The “P” indicates the tire is designed

for passenger vehicles. (Not all tires
have this information.)

2. Three-digit number (215): This number

gives the width in millimeters of the tire
from sidewall edge to sidewall edge.

3. Two-digit number (60): This number,

known as the aspect ratio, gives the
tire’s ratio of height to width.

4. R: The “R” stands for radial.

5. Two-digit number (16): This number is

the wheel or rim diameter in inches.

Advertising
This manual is related to the following products: