Gamo P-25 Blowback Tactical User Manual
Page 17
With settings from 1 to 3, use setting 1 at lowest light, 2 cloudy or overcast and 3 for brightest conditions. On scopes
with Red, Green and Blue dots use the color that shows up the best against the background you are looking at, and set
the brightness to match the light conditions.
• Remove the battery compartment cap by turning it counter-clockwise.
• Insert the battery with the positive (+) side facing up. (CR2032 3V)
• Replace the cap by turning it clockwise and tighten to avoid moisture or water from getting inside.
• The illuminated feature is activated by turning the rheostat switch to number 1. Each click will increase the intensity,
11 being the maximum.
• To turn the illuminated reticle off, turn the knob to the zero position.
Six Basic Elements Form The System Of An Illuminated Sight:
I. Objective Lens:
Lens responsible for the amount of light that gets inside the scope. In illuminated sights, the objective lens is
angled, this is not a defect. It is angled for the proper operation of the sight.
II. Image System:
A small metal tube with a 50% to 70% transmission mirror, set in a 15 degree slanted angle.
2. fuNdaMeNtals of aN IlluMINated sIght