Gamo P-25 Blowback Tactical - Manual (Page 18)

III. Windage and Elevation System:
The image system tube is fixed at one end and free at the other closest to the objective lens, the windage and
elevation screws serve as supports for this end while providing movement or correction to the reticle to adjust the
aiming point to the real point of impact of the bullet.
IV. Reticle:
The reticle replaces the iron sight system that usually comes with rifles. In the case of Illuminated Sights the
reticle is a projection of light forming one or more reticles in one or more colors, depending on the reticle design.
V. Ocular Lens:
The ocular lens seals the end of the sight closest to the eye, responsible for the final collimation of the image.
VI. Rheostat Switch:
Next to the on/off function, it regulates the intensity of the LED diode.
3. MouNtINg the sIght
be sure that the pIstol Is Not loaded. practIce safe fIrearM haNdlINg procedures
at all tIMes.
Set the rail onto the base. Align and set the crossbolts into the cut grooves of the base, and tighten each crossbolt with
the help of a coin or screwdriver.
Make sure that the sIght Is Not IN coNtact wIth the pIstol, aNd that No part of It
blocks the operatIoN of the actIoN. avoId over-tIghteNINg the screws oN the base.
DANGER !
WARNING !
CAUTION !
DANGER !
WARNING !
CAUTION !