Hudson Robotics Bar Code Print and Apply - Manual (Page 12)

Print and Apply User Manual Hudson Robotics, Inc.
10
B. Installing Media (Labels)
After the PA1000 is setup correctly the media for the printer must be installed.
1. Open the front cover of the printer. Inside the printer wall is a
schematic of how the media should run through the printer. Use this
as a guide to position the media and print ribbon.
2. The print head must be lifted up so the print ribbon and media can go
through the print head area. To lift up the print head slide the head bar
labeled below counterclockwise until the head pops up.
Print head arm