Reset, Voice command – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 134

Advertising
background image

best results, the Voice Training session should be com-

pleted when the vehicle is parked with the engine

running, all windows closed, and the blower fan

switched off.
This procedure may be repeated with a new user. The

system will adapt to the last trained voice only.
Reset

• Press the

button.

• After the “Ready” prompt, and the following beep, say

“Setup,” then “Reset.”

This will delete all phone pairing, phone book entries,

and other settings in all language modes. The System will

prompt you before resetting to factory settings.

Voice Command

• For best performance, adjust the rearview mirror to

provide at least ½ inch (1 cm) gap between the

overhead console (if equipped) and the mirror.

• Always wait for the beep before speaking.
• Speak normally without pausing, just as you would

speak to a person sitting a few feet/meters away from

you.

• Make sure that no one other than you is speaking

during a Voice Command period.

Performance is maximized under:

• Low-to-medium blower setting
• Low-to-medium vehicle speed
• Low road noise
• Smooth road surface

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133

Advertising