Cleaning plastic instrument cluster lenses, Seat belt maintenance – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 455

Advertising
background image

When cleaning the rear view mirror, spray cleaner on the

towel or rag that you are using. Do not spray cleaner

directly on the mirror.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are

molded in clear plastic. When cleaning the lenses, care

must be taken to avoid scratching the plastic.
1. Clean with a wet soft rag or micro-fiber towel. A mild

soap solution may be used, but do not use high

alcohol content or abrasive cleaners. If soap is used,

wipe clean with a clean damp rag.

2. Dry with a soft cloth.
Seat Belt Maintenance
Do not bleach, dye, or clean the belts with chemical

solvents or abrasive cleaners. This will weaken the fabric.

Sun damage can also weaken the fabric.

If the belts need cleaning, use MOPAR® Total Clean, a

mild soap solution, or lukewarm water. Do not remove

the belts from the vehicle to wash them. Dry with a soft

cloth.
Replace the belts if they appear frayed or worn or if the

buckles do not work properly.

WARNING!

A frayed or torn belt could rip apart in a collision and
leave you with no protection. Inspect the belt system
periodically, checking for cuts, frays, or loose parts.
Damaged parts must be replaced immediately. Do
not disassemble or modify the system. Seat belt
assemblies must be replaced after a collision if they
have been damaged (i.e., bent retractor, torn web-
bing, etc.).

454 MAINTAINING YOUR VEHICLE

Advertising