Time button, Clock setting procedure, Info button – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 256

Advertising
background image

If your vehicle is not equipped with or this feature is not

available on your vehicle, a “Not Equipped With

Uconnect Phone” message will display on the radio

screen.
TIME Button
Press the TIME button to alternate display of the time

and radio frequency.
Clock Setting Procedure

1. Press and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/

SCROLL control knob.

3. After adjusting the hours, press the right side TUNE/

SCROLL control knob to set the minutes. The minutes

will begin to blink.

4. Adjust the minutes using the right side TUNE/

SCROLL control knob. Press the TUNE/SCROLL con-

trol knob to save time change.

5. To exit, press any button/knob or wait five seconds.
The clock can also be set by pressing the SETUP button.

For vehicles equipped with satellite radio, press the

SETUP button, use the TUNE/SCROLL control to select

SET CLOCK, and then follow the above procedure,

starting at step 2. For vehicles not equipped with satellite

radio, press the SETUP button and then follow the above

procedure, starting at step 2.
INFO Button
Press the INFO button for an RDS station (one with call

letters displayed). The radio will return a Radio Text

message broadcast from an FM station (FM mode only).

4

UNDERSTANDING YOUR INSTRUMENT PANEL 255

Advertising