Turn-by-turn navigation — if equipped, Keyless enter-n-go™ (passive entry), Enable/disable the rear park assist system – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 244: Display units of measure in

Advertising
background image

Turn-by-Turn Navigation — If Equipped
When ON is selected, the Turn-by-Turn directions will

appear in the display as the vehicle approaches a desig-

nated turn within a programmed route. To make your

selection, press and release the SELECT button until

“ON” or “OFF” appears.
Keyless Enter-N-Go™ (Passive Entry)
This feature allows you to lock and unlock the vehicle’s

door(s) without having to press the RKE transmitter lock

or unlock buttons. To make your selection, press and

release the SELECT button until a check-mark appears

next to the feature showing the system has been activated

or the check-mark is removed showing the system has

been deactivated. Refer to “Keyless Enter-N-Go™” in

“Things To Know Before Starting Your Vehicle”.

Enable/Disable The Rear Park Assist System
The Rear Park Assist system will scan for objects behind

the vehicle when the transmission is in the REVERSE

position and the vehicle speed is less than 11 mph

(18 km/h). The system can be enabled with Sound Only,

Sound and Display, or turned OFF through the EVIC. To

make your selection, press and release the SELECT

button until a check-mark appears next to the feature

showing the system has been activated or the check-mark

is removed showing the system has been deactivated.

Refer to “Rear Park Assist System” in “Understanding

The Features Of Your Vehicle” for system function and

operating information.
Display Units Of Measure In
The EVIC, odometer, and Uconnect® gps (if equipped)

can be changed between English and Metric units of

measure. To make your selection, press and release the

SELECT button until “ENGLISH” or “METRIC” appears.

4

UNDERSTANDING YOUR INSTRUMENT PANEL 243

Advertising