Fuel saver technology — if equipped, Parking brake, Fuel saver technology – Dodge 2014 Challenger_SRT - Owner Manual User Manual

Page 333: If equipped

Advertising
background image

WARNING!

Fluid level should be checked on a level surface and
with the engine off to prevent injury from moving
parts and to ensure accurate fluid level reading. Do
not overfill. Use only manufacturer’s recommended
power steering fluid.

If necessary, add fluid to restore to the proper indicated

level. With a clean cloth, wipe any spilled fluid from all

surfaces. Refer to “Fluids, Lubricants, and Genuine

Parts” in “Maintaining Your Vehicle” for further informa-

tion.

FUEL SAVER TECHNOLOGY — IF EQUIPPED

This feature offers improved fuel economy by shutting

off four of the engine’s eight cylinders during light load

and cruise conditions. The system is automatic with no

driver inputs or additional driving skills required.

NOTE:

This system may take some time to return to full

functionality after a battery disconnect.

PARKING BRAKE

Before leaving the vehicle, make sure that the parking

brake is fully applied and place the shift lever in the

PARK or REVERSE (manual transmission only) position.
When the parking brake is applied and the ignition

switch is in the ON position (RUN position with Keyless

Enter-N-Go™), the “Brake Warning Light” in the instru-

ment cluster will illuminate.
NOTE:

• When the parking brake is applied and the transmis-

sion is placed in gear, the “Brake Warning Light” will

flash. If vehicle speed is detected, a chime will sound

to alert the driver. Fully release the parking brake

before attempting to move the vehicle.

332 STARTING AND OPERATING

Advertising