Baumer BA Scatec10 15 - Manual (Page 38)

User manual Scatec-10 / -15 38 / 44 Baumer Electric AG
Version 2011-03 www.baumer.com Frauenfeld, Switzerland
12 Accessories
Article-Nr.
Connectors
Straight connector (6-pin) 10104236 (enclosed)
Straight connector (8-pin) 10153202
Right angle connector (6-pin)
10153094
Right angle connector (8-pin) 10153095
(all connectors metal casing and shielded)
Cables
ESG 16DP1000G 10156266 Main-cable; 10m long, shielded, with straight connector
(6-pin)
Retro-reflective foil
FTDF 025F025 10156653 retro-reflective foil; 25mx25mm; self adhesive
ScaDiag-Kits
ScaDiag-Kit SCATEC-10 10156490 complete set for connecting a Scatec-10 to a PC
ScaDiag-Kit SCATEC-15 10156491 complete set for connecting a Scatec-15 to a PC
13 Maintenance
The Scatec-10 / -15 requires no maintenance apart from keeping the front windows clean. Dust or
fingerprints can impair the sensor function. It is normally sufficient to wipe the windows dry with a clean (!)
soft cloth. Alcohol may be used for heavy soiling.
14 Troubleshooting
Whenever possible use the application software ScaDiag for troubleshooting!
The software ScaDiag allows the user to record and to graphically display data without interfering with the
running production. This is a tremendous help if there is a need to take a closer look at certain aspects of a
production run. The collected data can be analyzed by the customer himself or they can be forwarded by e-
mail to Baumer electric for that purpose. Troubleshooting is considerably faster if there is real data available
of the production causing problems.