FRIGIDAIRE FGHB2866PP - Manual (Page 36)


NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.
CAUTION
Wear gloves when replacing incandescent light
bulbs to avoid getting cut.
36
CARE & CLEANING
Replacing LED Lights (select models)
The fresh food compartments of your refrigerator
may have LED lights. Always use Frigidaire parts
for replacement.
To replace LED Lights:
1 Unplug your refrigerator’s power cord.
2 Remove lens cover.
3 Remove LED board.
4 Replace LED board and snap in place assuring
the light is facing in toward the unit (inside
fresh food).
5 Replace lens cover.
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online
at www.frigidaire.com/store, or through the dealer
where you bought the refrigerator. Here is the
product number to request when ordering:
LED Light, Part #242196201
Incandescent Lights (40-watt bulb),
Part #5305514148
LED Light Board Removal
Lens Removal
Replacing Light Bulbs (select models)
Light
Bulb
Light Sockets
Located Behind
Glass Shelves
Light
Bulb
Refigerator
Light Cover
Refrigerator Light
Light Socket
Located in Upper
Freezer Section
Freezer
Light Cover
Light
Bulb
Light
Bulb
Freezer Light
1 Unplug your refrigerator’s power cord.
2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an
appliance bulb of the same type and wattage
(normally 40 watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator’s power cord.