Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 105)

CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 91
Wide Area DDS Configuration Window
The Wide Area DDS configuration window shown in Figure 31 displays after clicking on the
Next>> button in the Ethernet 1 and 2 configuration window or the Wide Area Frame Relay Time
Slot and PPP configuration windows, depending on whether you have installed one or two WPIMs
in the CSX400, and the order in which you are configuring them.
This section explains how to configure the CSX400 Wide Area DDS interface using QuickSET.
Figure 31 Wide Area DDS Configuration Window
NOTE
The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for
Table 17 . Consult the service provider for the correct settings.