Wide area hdsl configuration window – Cabletron Systems Cabletron CyberSWITCH CSX400 User Manual
Page 107
Advertising
CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide
93
Wide Area HDSL Configuration Window
The Wide Area HDSL configuration window shown in
displays after clicking on the
Next>> button in the Ethernet 1 and 2 configuration window or the PPP-HDSL configuration
window.
This section explains how to configure the CSX400 Wide Area HDSL interface using QuickSET.
Figure 32
Wide Area HDSL Configuration Window
NOTE
The wiring provider (i.e., Internet Service Provider (ISP) contractor, etc.) determines
the settings for
. Consult the service provider for the correct settings.
Advertising
This manual is related to the following products: