Bridging and routing configuration, Bridging and routing configuration window, Bridging – Cabletron Systems Cabletron CyberSWITCH CSX400 User Manual
Page 113: And routing configuration, Section
Advertising
CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide
99
Once the Wide Area HDSL Time Slot configuration is complete, click on the Next>> button, and
go to the
Bridging and Routing Configuration
window.
Bridging and Routing Configuration
Once all the necessary network information is collected for the WAN, the CSX400 can be
configured for inverse multiplexing or bridging and/or routing.
Bridging and Routing Configuration Window
The first Bridging and Routing configuration window shown in
on the Next>> button at the bottom of the Wide Area (Frame Relay, PPP, or HDSL) Time Slot
configuration window or the Wide Area (Sync or DDS) configuration window.
Figure 36
Bridging and Routing Configuration Window
Advertising
This manual is related to the following products: