Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 125)

CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 111
Advanced Routing Configuration Window
The Advanced Routing configuration window shown in Figure 42 displays after you click on the
Advanced button in the (IP/IPX) Routing configuration window. Use this window to enable RIP
routing, configure a Dynamic Host Configuration Protocol (DHCP) server on the CSX400, set an
IP address for a remote DHCP server, or set up Network Address Translation. If you wish to run
your WAN connection in Numbered Mode, enter the Local WAN IP Address Subnet Mask for
Numbered Mode or leave these fields blank for Unnumbered Mode.
Figure 42 Advanced Routing Configuration Window