Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 155)

General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 141
SNMP Community Names Screen
This section explains how to assign community names. Community names allow you to control
Local Management access by establishing three passwords. Each password controls varying levels
of access to CSX400 Local Management.
Access the SNMP Community Names screen, shown in Figure 60 , from the Setup Menu screen
by using the arrow keys to highlight the SNMP Community Names option and pressing ENTER.
The SNMP Community Names screen displays.
Figure 60 SNMP Community Names Screen
Community Name Access Policy
To perform any operations on the SNMP Community Names screen, you must have used the
super-user community name at the User Password prompt when initiating the Local Management
session. The default community name for each access level is public or press ENTER.
The following explains each of the SNMP Community Names screen fields:
SNMP COMMUNITY NAMES
Community Name
public
public
public
Access Policy
read-only
read-write
super-user
SAVE RETURN
2012_05
CSX400 Local Management Flash Image Version: XX.XX.XX