Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 167)

General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 153
IP Configuration Screen
The IP Configuration screen enables you to access the IP General Config and IP RIP screens to
configure the CSX400 for IP Routing and enable RIP on the CSX400.
Access the IP Configuration screen, shown in Figure 65 , by using the arrow keys to highlight the
IP menu item on the Router Setup screen and pressing ENTER. The IP Configuration
screen displays.
Figure 65 IP Configuration Screen
IP Configuration Screen Fields
The following list describes each of the IP Configuration screen fields.
IP General Config — Use this field to access the IP General Config screen and configure the
CSX400 for IP routing.
IP RIP — Use this field to access the IP RIP screen and enable Routing Information Protocol
(RIP) routing on the CSX400.
IP CONFIGURATION
IP General Config
IP RIP
RETURN
2012_09
CSX 400 Local Management Flash Image Version XX.XX.XX