Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 176)

General Configuration Using Local Management
162 CSX400 and CSX400-DC User’s Guide
IPX Configuration Screen
The IPX Configuration screen enables you to access the IPX General Config, IPX RIP, and IPX
SAP screens to configure the CSX400 for IPX Routing and enable RIP routing or Source
Advertisement Protocol (SAP) routing on the CSX400.
Access the IPX Configuration screen, shown in Figure 68 , by using the arrow keys to highlight the
IPX menu item on the Router Setup and pressing ENTER. The IPX Configuration screen displays.
Figure 68 IPX Configuration Screen
IPX Configuration Fields
The following list describes each of the IPX Configuration screen fields.
IPX General Config — Use this field to access the IPX General Config screen and configure the
CSX400 for IP routing.
IPX SAP — Use this field to access the IPX SAP screen and enable Source Advertisement
Protocol (SAP) routing on the CSX400.
IPX RIP — Use this field to access the IPX RIP screen and enable Routing Information Protocol
(RIP) on the CSX400.
IPX CONFIGURATION
IPX General Config
IPX SAP
RETURN
IPX RIP
CSX400 Local Management Flash Image Version XX.XX.XX