Sample configuration – Cabletron Systems Cabletron CyberSWITCH CSX400 User Manual

Page 56

Advertising

Planning for CSX400 ISDN Configuration

42 CSX400 and CSX400-DC User’s Guide

Sample Configuration

A sample configuration of a hypothetical network is provided in this section.

Figure 10

depicts a

small office (FP2) accessing a central site (FP3) via an ISDN link. The small office also has access
to Internet through an Internet Service Provider (ISP).

The small office and central site have IP routing with a Class B addressing scheme and IPX
routing. Bandwidth-on-demand is configured for accessing central site FP3. A maximum of one
line is configured for calling the ISP (though two different phone numbers are defined for use).

Table 7

provides sample system settings,

Table 8

provides sample settings for the remote router at

the FP3 site,

Table 9

pro vides sample settings for the remote router at the ISP site and

Table 10

provides sample bridging and routing settings.

Figure 10

Sample Network Diagram

OFFICE/HOME OFFICE