Cabletron Systems Cabletron CyberSWITCH CSX400 - Manual (Page 85)

CSX400 and CSX400-DC User’s Guide 71
7
CSX400 Configuration with QuickSET
This chapter provides step-by-step instructions for configuring the CSX400 using QuickSET.
\
Normally, QuickSET automatically establishes a communication link with the CSX400 being
configured. However, under certain circumstances, QuickSET may not be able to locate the
CSX400 automatically. In this case, the IP Address window shown in
Figure 21 displays:
Figure 21 IP Address Window
NOTE
Before configuring the device, you must set up your computer based on the READ ME
FIRST! documentation included with the product and installed the CSX400 using the
QuickSTART Guide located in the QuickSET CD case.