Configuring scan to folder settings, 11 configuring scan to folder settings – Canon Authorized Sen for ImageRUNNER Machines Version 4.1 User Manual

Page 100

Advertising
background image

100

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

3.11 Configuring Scan to Folder Settings


You can enable the Scan to Folder function and configure the Access Controls and
General Settings.

1. Click [Scan to Folder] ➞ [General].


If necessary, see the screen shot in step 14 of

“Flow of Configuration Operations,”

on p. 35.

2. Select the [Enable Scan to Folder] check box.


If you want to disable the Scan to Folder function, click the [Enable Scan to Folder]
check box to clear the check mark.

NOTE

You can only disable the Scan to Folder function if there is at least one other
Authorized Send function enabled.

Advertising