Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 124)

124 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
3.19 Using the Brand Configuration Tool (Optional)
This section describes how to dynamically modify the appearance of the end user’s
interface screens using the optional Brand Configuration tool. You can customize the
application’s banner image and colors, portal service logo, screen colors, button colors,
and special button colors.
NOTE
• If you are upgrading from a previous version of Authorized Send that uses the default
brand configuration, the new brand configuration takes effect when Authorized Send
Version 4.1 is installed.
• If you are upgrading from a previous version of Authorized Send that uses a
customized brand configuration, the new brand configuration does not take effect
when Authorized Send Version 4.1 is installed (the brand configuration is left as is).
1. Open a browser window ➞ enter the following URL:
http://<device IP>:8000/AuthSendConfiguration/branding
(Replace <device IP> with the IP address of the MEAP device.)
IMPORTANT
Enter AuthSendConfiguration/branding exactly as shown, as it is
case-sensitive.
The Brand Configuration tool screen is displayed.