Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 55)

Authorized Send Installation and Configuration Guide for imageRUNNER Machines 55
Authentication Settings
Method: NTLM
Pull Host from Select [Yes] to automatically pull the host information
DNS:
from the DNS after you click [Create]. Select [No] if you
want to manually configure the host information. The
default setting is ‘No’.
If you select the [Yes] radio button, the first “live”
domain controller is used as the authentication server
after you click [Create].
Host:
This text box is only displayed if Pull Host from DNS is
set to ‘No’. Enter the DNS name or IP address of the
authentication server.
Port:
This text box is only displayed if Pull Host from DNS is
set to ‘No’ and if the [Pull Port from DNS] check box is
not selected. Enter the connecting port number of the
authentication server. You can enter a maximum of five
numbers. The default port number is ‘389’.
SSL:
This check box is only displayed if Pull Host from DNS
is set to ‘No’ and if the [Pull Port from DNS] check box
is not selected. Select this check box if you want the
authentication server to use SSL. If you select this check
box, the host port number automatically changes to ‘636’.
Test:
This check box is only displayed if Pull Host from DNS
is set to ‘No’. Select this check box if you want the
connection to the authentication server to be verified
before you save the settings. The [Test] check box is
selected by default.
Domain Name:
Enter the domain name of the authentication server.
Pull Port from
This check box is only displayed if Pull Host from DNS
DNS: is set to ‘Yes’. Select the [Pull Port from DNS] check box
if you want the Port text box to be dynamically populated
from the DNS.