Compaq MP3800 - Manual (Page 11)

Compaq iPAQ Microportable Projector MP3800 User’s Guide 2–1
2
Using the Projector
Setting Up the Projector
Follow the instructions below and on the following pages to set
up the projector. Separate setup instructions are described for the
following products:
■ Notebook computers
■ Desktop computers
■ Compaq iPAQ Pocket PC with VGA capability
The projector is hot pluggable and can be connected to any input
source while the source is in use.
Place the projector on a stable desk, table, tripod, or ceiling
mount at a distance not less than 3.7 feet (1.1 meters) and not
greater than 32.8 feet (10.0 meters) from the projection screen.
Å
WARNING: To reduce the risk of electric shock or damage to your equipment:
■ Do not disable the power cord grounding plug. The grounding plug is
an important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
■ Disconnect power from the projector by unplugging the power cord
from the electrical outlet.
■ Do not place anything on power cords or cables. Arrange them so
that no one may accidentally step on or trip over them. Do not pull
on a cord or cable. When unplugging from the electrical outlet, grasp
the cord by the plug.
281124-001.book Page 1 Tuesday, April 30, 2002 10:00 AM